What are the challenges and challenges associated with the launch of new services?

• high cost of fiber lease
• problems with the availability of free fibers
• a lot of formalities when leasing the next fiber

What solution do we have?

The lease of additional fibers from the operator enables the commissioning of further services. However, the lease process itself involves additional costs and takes time.

Transmission systems allow you to avoid these formalities. Thanks to them, we can run more than one service on a single optical fiber, and the whole process is as simple as connecting an optical module to a switch.

Thanks to transmission systems, we can reduce operating costs and reduce the time to launch new services on the network.

• 18 services after two fibers

Passive transmission systems allow multiple services to be transmitted at different wavelengths. With this type of system we can transmit Ethernet, Fibre Channel, etc. services all by a single fiber or by a pair of fibers.

The standard CWDM system allows up to 18 services to be transmitted over just a pair of fibers. Of course, on the first day we do not have to run all 18 services. We can expand the system with more transmissions as demand increases. The whole process does not require a technical break, since it does not affect the already running services.

• Active aggregation of services up to 100G

Transmission systems that use active devices such as transponders and muksponders operate on the principle of aggregating lower bandwidth services such as 10Gb Ethernet and 16G Fibre Channel into a single high-bandwidth interface of 100, 200 or even 400G. Aggregation is carried out using the OTN standard.

Active transmission systems, in addition to transmitting large amounts of data, also allow performance monitoring of individual services, and some devices offer the opportunity to improve network security by implementing encryption in layer one.

• 8 servings of 100G each single fiber

Transmission systems support a wide range of services. If the standard in our network is 100Gb Ethernet, then thanks to the O-Band WDM system we can transmit such services locally 100% passively without the use of amplifiers.

With O-Band, we can send 8 services per single fiber or 16 100G services per pair of fibers.

What are the benefits of transmission systems?

• Better use of infrastructure

Is there a lack of fiber or does the lease of another generate too much cost? The transmission system limits the number of fibers to a single pair. You don't have to worry about the cost of the lease. Now your priority will be to increase the number of services and expand the network, not to fight for additional fibers.

• Saves space and resources

A single optical fiber used by a transmission system can replace many traditional fibers. This saves space and reduces infrastructure costs.

• Scalability and Flexibility

xWDM provides the scalability of your data center network infrastructure. Thanks to the possibility of adding additional channels, without the need for physical expansion, this system allows flexible adaptation to the growing needs of data transmission.

• Installation simpler than it seems

The installation of the multiplication system is reduced to the connection of elements with patchwork cords. The whole process is very fast and error-proof. You can start a passive CWDM system in literally a few hours.

• Installation simpler than it seems

The installation of the multiplication system is reduced to the connection of elements with patchwork cords. The whole process is very fast and error-proof. You can start a passive CWDM system in literally a few hours.

• Absence of formalities

In case of expansion of the transmission system, you skip the formalities related to reporting to the UKE or preparation of the executive project.

• Security

Transmission systems make it possible to secure services on many levels. The first is to protect services against physical damage to the system, e.g. against cable damage or loss of one of the power sources. At this level, we achieve this by applying a backup route or full hardware redundancy. The second level is to directly protect the transmission from unauthorized access with layer one encryption.

• Ethernet and Fibre Channel in one fiber

If you have Ethernet services running on your network, Fibre Channel with different bandwidths, you can also use a transmission system. Systems such as CWDM and DWDM support virtually the entire range of protocols. Most interestingly, they can work in the same optical fiber.

Leave the layer first for us!

• Creating a data center transmission system — where do we start?

We know that every company or institution is different, so we offer solutions tailored to individual needs. We start each project with a free consultation, during which we will ask you what your network looks like, what goal you want to achieve and what you plan for the future. After a 20-minute conversation, we will be able to determine what technology to use and present some of the best solutions.

The next stage is measurements. If during the consultation, we notice that for the correct operation of the system it is necessary to check the optical fiber track, then we will tell you how to do it.

Don't have the right tools? It doesn't hurt. We'll check it out for you

• Can I rent equipment for tests?

We want you to be 100% sure that the investment in the transmission system will meet your expectations. After the consultation stage and deciding which of the presented concepts will be right for you, we have two options to check it in action. The first is to reproduce a fragment of your network with us in the laboratory, where we can present the operation of the system, and the second is testing with you in a production environment.

• How long does it take to implement a transmission system? Who makes them?

Most solutions for connections between locations rely on passive devices that do not require power or configuration. The system is strapped by patchcords. This eliminates the need for fiber welding. That is why the installation is simple and fast enough that customers decide to start on their own. If the system requires the involvement of a specialized engineer, then Salumanus ensures the implementation, configuration and commissioning of all designed services. Depending on the size of the implementation, it usually takes 1-2 working days.

• How much does a data center transmission system cost?

To answer this question, we need to clarify what can make up the price of a transmission system. The determination of the solution technology, the selection of devices or the creation of a connection diagram is free of charge as part of the consultation.

The costs are:

1. optical modules
2. passive-patchcord devices

Optional:

1. measurements
2. implementation

As you can see, there are many constituent parts of the final amount. Here we will not give you the cost of implementation directly, but we can use some comparison. According to T-Mobile estimates, the average cost of downtime caused by an IT outage is about $88,000 per hour. (Source: https://testerzy.pl/baza-wiedzy/artykuly/ile-kosztuje-awaria-w-it)

Undertaking the implementation of a transmission system that:

1. will guarantee you safety
2. reduce the costs associated with the traditional construction of a fiber optic tract
3. will reduce the cost of expansion with subsequent transmissions only to the purchase of modules
4. Enabling more efficient use of available infrastructure
5. will allow possible encryption of the transmission in layer one

You will invest about ¼ of the costs that a failure would consume. Estimate the transmission system for your needs.